各路高手帮帮忙翻译中文

Spiral quick-freezing machine cleaning procedures
The apparatus needed: high-pressure water gun, brushes, contain chemical containers
Specific steps:
1, to ensure that quick-freezing machine production has been completed, all products have been unloaded from the quick-freezing machine I expected to start-cream to remove build-up in the evaporator fin surface of the cream.
2, open all the doors to enhance the internal temperature of quick-freezing machine.
3, sending machines are still running spiral, with detergent, quick-freezing machine brush brushing the entire internal and clean (especially the conveyor belt on each floor).
4, with detergent, brush brushing quick-freezing machine feed planes, expected to regional and tensioning device and clean.
5, launched conveyor belt scrubber.
6, with scrubbers clean the entire conveyor belt at least twice (based on conveyor speed settings to determine the cleaning time).
7, start defrosting device to rinse water evaporator.
8, the use of high-pressure water gun washing machines send framework, frame, ceiling, walls, doors and floors. Washing the order is from top to bottom.
9, spiral send-off.
10, and close all the revolving door Dangban.
11, and close all the doors.
12, spiral started sending machine, dryer and start with a fan about 2 to 5 minutes, the conveyor belt on the water drying.
13, open all the doors, the main air-dry quick-freezing machine.
Note: ① the process used by the cleaning agent must be on the chemical properties of aluminum and stainless steel and compatible.
② in the high-pressure cleaning process should be recalled en Julv (PVC) film covering the control panel to prevent the starter motor damage.
③ defrost work must be carried out if necessary, (that is, when the evaporator frost and air flow disruption). Defrost Week twice during the interval because of the characteristics of different products.

Screw type instant freezer clean operation sequence needs labor appliance: Water torch, brush, splendid attire chemical vessel concrete operations step: 1, guaranteed that the instant freezer already completed the production, all products have dumped instant freezer's discharge hole, starts to flush the frost, eliminates builds up in the evaporator wing board surface frost. 2, opens all gates to enhance the instant freezer internal temperature. 3, spiral conveyer still when movement, with liquid detergent, brush cleaning instant freezer entire, and flushes cleanly (is specially each conveyer belt). 4, with the liquid detergent, brush cleaning instant freezer's feeding, the material region as well as the tightening device, and flushes cleanly. 5, start conveyer belt scrubber. 6, washes and arranges nicely the strip conveyer belt two times with the scrubber (to determine scavenging period at least clear according to transmission tape speed hypothesis). 7, the start defrost the water installment to flush the evaporator. 8, the use water torch flushes the conveyer frame, the support, the suspended ceiling, the wall, the gate and the floor. The flushing order is from top to bottom. 9, closes the screw type conveyer. 10, closure all revolving door thrustplate. 11, closure all gates. 12, starts the screw type conveyer, and starts a belt drying up air blower about 2~5 minutes, conveyer belt's on water drying up. 13, opens all gates, main instant freezer air seasoning. note:①This process uses the cleansing agent must in chemistry attribute and the stainless steel and the aluminum compatible. ②Should gather the chlorine in the high-pressured clean process to recall that the alkene (P.V.C) the piece cover control panel, prevents to the motor starter to create the harm. ③The defrosting work must when has the necessity carry on (i.e., when evaporator rime as well as air transport are blocked) 0.2 defrosting week period's time interval varies because of the product characteristic.

Needs labor appliance: Water torch, brush, splendid attire chemical vessel concrete operations step: 1, guaranteed that the instant freezer already completed the production, all products have dumped instant freezer's discharge hole, starts to flush the frost, eliminates builds up in the evaporator wing board surface frost. 2, opens all gates to enhance the instant freezer internal temperature. 3, spiral conveyer still when movement, with liquid detergent, brush cleaning instant freezer entire, and flushes cleanly (is specially each conveyer belt). 4, with the liquid detergent, brush cleaning instant freezer's feeding, the material region as well as the tightening device, and flushes cleanly. 5, start conveyer belt scrubber. 6, washes and arranges nicely the strip conveyer belt two times with the scrubber (to determine scavenging period at least clear according to transmission tape speed hypothesis). 7, the start defrost the water installment to flush the evaporator. 8, the use water torch flushes the conveyer frame, the support, the suspended ceiling, the wall, the gate and the floor. The flushing order is from top to bottom. 9, closes the screw type conveyer. 10, closure all revolving door thrustplate. 11, closure all gates. 12, starts the screw type conveyer, and starts a belt drying up air blower about 2~5 minutes, conveyer belt's on water drying up. 13, opens all gates, main instant freezer air seasoning. note:①This process uses the cleansing agent must in chemistry attribute and the stainless steel and the aluminum compatible. ②Should gather the chlorine in the high-pressured clean process to recall that the alkene (P.V.C) the piece cover control panel, prevents to the motor starter to create the harm. ③The defrosting work must when has the necessity carry on (i.e., when evaporator rime as well as air transport are blocked) 0.2 defrosting week period's time interval varies because of the product characteristic.